Portable System for Industrial monitoring and Diagnostic
Article Sidebar
Main Article Content
Abstract
This paper presents a proposal for a portable industrial monitoring and diagnostic system, which is a result recently obtained within the framework of a project associated with a national science and technology program.
From the exposition of a set of general technical requirements to be followed, this work presents the basic concept proposed, which is integrated by three modules, as well as the fundamental design elements, in particular, those concerning the electrical scheme that had to be implemented, the programs involved and the industrial design that had to be proposed for one of the modules.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms:
- The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform and create from the material
- The licensor cannot revoke these freedoms while complying with the terms of the license
Under the following conditions:
- Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
- NonCommercial - You may not use the material for a commercial purpose.
- There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
- Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).
The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.
References
Hernández-Montero, F. E.; Calderón, C. A. & Ruiz-Barrios, M. L. 2023. “El camino hacia la implementación del mantenimiento predictivo 4.0 en Cuba”. Ingeniería Industrial, 44(3): 1–12, ISSN: 1815-5936.
Martínez Castro, V. H. 2011. “Monitoreo y diagnóstico de sistemas de automatización SIMATIC.” .
Montero, F. E. H.; Barrios, M. L. R.; Suárez, J. R. R.; Martínez, M. E. I.; Gómez, J. P.; Uribe, V. A.; Marín, E. P.; Mancilla, J. C. G.; Hernández, Y. P.; Lorenzo, A. R.; Román, J. H.; Soberao, M. H. & Rodríguez, I. D. 2023. “Contribución al desarrollo nacional de tecnología de monitoreo y diagnóstico industrial”. Anales de la Academia de Ciencias de Cuba, 13(3): 1282, ISSN: 2304-0106.
Pérez, F. M. & Gassinski, L. 2022. “La eficiencia energética y el papel del mantenimiento en la misma: Energy Efficiency and the Role of Maintenance on it”. Ingeniería Energética, 43(2): 11–11, ISSN: 1815-5901.
Pérez Rondón, F. A. 2021. “Conceptos generales en la gestión del mantenimiento industrial”.
Valdés, M. S. D. R. H.; Montero, C. F. E. H.; Luna, D. R. D. H. & Ruiz, D. V. A.n.d. “Ponencia: P_ Título: Diseño para el monitoreo y diagnóstico industrial.”